Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Packard Bell A720 odd problem
Hi!
Monitor picture too wide and bent on the sides, you can push the buttons and see the adjuster slide but it has no effect. Any suggestions on what commonly fails? The fifteen inch versions of these monitors usually have capacitors go bad. I've also found cold solder joints inside. If you need to make internal adjustments don't expect to find much if anything inside these. They are very cheap monitors. William |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Packard Bell A720 stuck on "Soft power down" mode ? | Electronics Repair | |||
Water Pump / Pressure Tank Problem !!!!!! | Home Ownership | |||
Problem with new water heater (electric) - please advice | Home Ownership | |||
Problem with retrace lines on EIZO F55S... | Electronics Repair | |||
Toshiba vertical problem | Electronics Repair |