 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
ATX PSU PWM chip
Would like to modify a 250W ATX PSU to 13.8V and use it to power ham radio
gear. There's quite a bit of helpful info available on the net, but I haven't found any data on the PWM controller IC used which is marked HP1001WA-1. The IC package is a DIP14, the PSU itself is a Dell HP-P2507F3CP. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Chip Carving class | Woodworking | |||
| SODIMM Socket - Which Pins are Chip Select? | Electronics Repair | |||
| How to build a chip tray for a lathe stand? | Metalworking | |||
| Chip Capacitor & Notebook Motherboard | Electronics Repair | |||
| TEAC Receiver with shorted analog switch chip | Electronics Repair | |||
Linear Mode
