Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
pb
 
Posts: n/a
Default Identify this part!

http://www.baran.plus.com/eyeball/images/aaa.jpg

What exactly does this do? Came out of a Miele dishwasher Im attempting to
repair. Would this part be easy to replace, and where could I get it?

Also, Im trying to remove the propellor from the pump.

http://www.baran.plus.com/eyeball/images/bbb.jpg

Should it just pull off, or might it require a special tool?

Cheers.


  #2   Report Post  
simon hanlon
 
Posts: n/a
Default

Looks like a switch with a melted connector to me
"pb" wrote in message
...
http://www.baran.plus.com/eyeball/images/aaa.jpg

What exactly does this do? Came out of a Miele dishwasher Im attempting to
repair. Would this part be easy to replace, and where could I get it?

Also, Im trying to remove the propellor from the pump.

http://www.baran.plus.com/eyeball/images/bbb.jpg

Should it just pull off, or might it require a special tool?

Cheers.



  #3   Report Post  
SISC
 
Posts: n/a
Default

It is a micro switch with connetor harness using three wires;common,normally
open and normally closed.
It proves that door is closed or some other item engaged etc; depends where
you pulled it out from.
Try PrincessAuto or other store; the rating is within common range.If you
cant find it send message will get you one. MS
"simon hanlon" wrote in message
...
Looks like a switch with a melted connector to me
"pb" wrote in message
...
http://www.baran.plus.com/eyeball/images/aaa.jpg

What exactly does this do? Came out of a Miele dishwasher Im attempting
to repair. Would this part be easy to replace, and where could I get it?

Also, Im trying to remove the propellor from the pump.

http://www.baran.plus.com/eyeball/images/bbb.jpg

Should it just pull off, or might it require a special tool?

Cheers.





  #4   Report Post  
NSM
 
Posts: n/a
Default


"pb" wrote in message
...

http://www.baran.plus.com/eyeball/images/aaa.jpg


Standard microswitch. Replace the connector as well or you will be pulling
it all apart again.

N


  #5   Report Post  
Ron(UK)
 
Posts: n/a
Default

pb wrote:
http://www.baran.plus.com/eyeball/images/aaa.jpg

What exactly does this do? Came out of a Miele dishwasher Im attempting to
repair. Would this part be easy to replace, and where could I get it?

Also, Im trying to remove the propellor from the pump.

http://www.baran.plus.com/eyeball/images/bbb.jpg

Should it just pull off, or might it require a special tool?

Cheers.


Impellor probably unscrews but it might have a left handed thread.

Ron

--
Lune Valley Audio
Public address system
Hire, Sales, Repairs
www.lunevalleyaudio.com
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help finding old router part Jon Woodworking 14 March 18th 06 11:40 PM
Part P Proto-FAQ [email protected] UK diy 0 April 28th 05 02:04 AM
Part P - new cable colours CRB UK diy 50 November 30th 04 11:13 PM
U NEED 2 KNOW PART P dms1.go-plus.net UK diy 42 November 24th 04 11:19 PM
rec.woodworking ANTI-FAQ Part 1 of 10 - General Luigi Zanasi Woodworking 2 April 3rd 04 12:15 PM


All times are GMT +1. The time now is 08:11 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"