Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
TV tunes all channels but not properly.
Teak TV ct-M687;HDTV Any advice please.
All channels can be somewhat tuned but none of them look good. Picture is distorted/wavy and the sound cuts in and out for about 5 minutes from when TV is first turned on. I have tested with a VCR and cannot receive stations from the RF but this is confusing me: I switch the VCR to test and can get the 2 vertical white lines by tuning the TV to channel 3 (via RF) but cannot receive anything. However I do get perfect picture and sound via the scart connector. So far I have resoldered etc.; I have B+ at 12.11v and various voltages on other pins at the tuner but no reading on the IF pin. I would appreciate any thoughts on narrowing down the problem. Thanks ALI |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Samsung Microwave & GE Microwave oven | Electronics Repair | |||
New Emerson TV can't find broadcast channels? | Electronics Repair | |||
Yamaha R3 losing stored channels | Electronics Repair | |||
problems getting cable channels on a sony tv | Electronics Repair |