"Stephen A Vicinanza" ha scritto nel messaggio ... Hi, Anyone know a good place on the internet to get the little belts for the laser pickup rail on a Carver DTL 50? I use standard banknotes belts for turntables, floppydrives, cassettes and cds. I. |
Stephen,
If Carver service can't help you, then you might try MCM Electronics (www.mcmelectronics.com) a service industry vendor. I would get the belts from Carver if at all possible, as I've found that the tiny belts used in CD player sleds are very critical. A bit to loose and they don't work, but a bit too tight and they bind up. The drawer belts are usually not as fussy. Regards, Tim Schwartz Bristol Electronics Stephen A Vicinanza wrote: Hi, Anyone know a good place on the internet to get the little belts for the laser pickup rail on a Carver DTL 50? I'm going to try Carver service, also. But any ideas would be greatly appreciated. Steve -- Stephen A Vicinanza Vicinanza Associates 121 Hickory Ave Staten Island NY 10305 1 718 981 2303 1 917 681 8788 |
All times are GMT +1. The time now is 10:37 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter