Denon AVR-681 help please
Hello all,
I've got a unit here that goes into protection a few seconds after power up. I've got NOTHING connected to it, and the volume all the way down. The output transistors all ohm-meter OK. The +/- 45 rail (approximate) seems OK. ALL 5 channels have about +25V on them, which explains the protection, and indicates some sort of power supply issue. Any ideas? I don't have a schematic or service manual for this unit. Thanks for your time. Regards, Tim Schwartz Bristol Electronics |
"Tim Schwartz" wrote in message ... Hello all, I've got a unit here that goes into protection a few seconds after power up. I've got NOTHING connected to it, and the volume all the way down. The output transistors all ohm-meter OK. The +/- 45 rail (approximate) seems OK. ALL 5 channels have about +25V on them, which explains the protection, and indicates some sort of power supply issue. Any ideas? I don't have a schematic or service manual for this unit. Thanks for your time. Regards, Tim Schwartz Bristol Electronics These get 1 ohm resistors bad in the regulated power supply area - need to be changed out for .22 @ 1 watt. Mark Z. P.S. Some models they are R115 and R116, not sure of yours. |
All times are GMT +1. The time now is 08:52 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter