APC Professional Powercell UPS
 

Hello all!

I have the already mentioned UPS. It came to me with a dead battery, so I
arranged for a large 12 volt gel-cell battery (brand new!) to be hooked up
to it. The UPS charges this battery, but there is something funny going on.

If a "real" power outage occurs, this UPS will simply turn off. It will not
go to battery power like it should. For all intents and purposes it appears
to be dead. It is certainly not overloaded...all I have attached is one 60
watt light bulb and an SMC 16 port 100Mbit network switch. More often than
not the light bulb is turned off, though this does not seem to matter.

But if I "fake" a power outage by doing any of pulling the plug, turning off
the circuit breaker or even pulling the house main out, the UPS switches to
battery and works like it ought to until the battery is depleted.

I'm pretty sure the large battery is not a problem here. I have another of
the same UPS that still has the proper battery in it. This battery works no
better in the troublesome unit during a "real" power outage. Likewise, the
large battery works fine on the properly functioning unit during a real
power outage.

Any thoughts? I'm stumped and I would appreciate any insights on this.

William

So what's the difference between a ' real ' power outage, and pulling the
plug or the house breaker ? Are you talking reduced line voltage brownout
here, or full loss of power supply to the house ?


"William R. Walsh" wrote in
message news:HoYte.90993$nG6.6167@attbi_s22...
Hello all!

I have the already mentioned UPS. It came to me with a dead battery, so I
arranged for a large 12 volt gel-cell battery (brand new!) to be hooked up
to it. The UPS charges this battery, but there is something funny going
on.

If a "real" power outage occurs, this UPS will simply turn off. It will
not
go to battery power like it should. For all intents and purposes it
appears
to be dead. It is certainly not overloaded...all I have attached is one 60
watt light bulb and an SMC 16 port 100Mbit network switch. More often than
not the light bulb is turned off, though this does not seem to matter.

But if I "fake" a power outage by doing any of pulling the plug, turning
off
the circuit breaker or even pulling the house main out, the UPS switches
to
battery and works like it ought to until the battery is depleted.

I'm pretty sure the large battery is not a problem here. I have another of
the same UPS that still has the proper battery in it. This battery works
no
better in the troublesome unit during a "real" power outage. Likewise, the
large battery works fine on the properly functioning unit during a real
power outage.

Any thoughts? I'm stumped and I would appreciate any insights on this.

William