Panasonic CT-34WX50
Hi, Aquired this TV about a week ago. Was dead dead. No standby
supply. I found an open winding on the primary side of the standby xformer. Thought AHA !! Ordered a new one, put it in. Now, the power LED blinks 5 times, pauses, and repeats. Theres about 4 relays n this things pwr supplies. None of em ever click. Any ideas? TIA |
Probably need to acquire the service manual and do some real in-depth
diagnostics of the standby power supply circuits. Any potential that opened the primary of the standby SMPS Transformer probably also induced other damage in the supplies, even maybe the controller circuits. At least with the power led blinking you have minimal standby, enough to run the MCU, Eprom, and the diagnostic routines. I'll bet you have open or damaged components in the chopper - control circuitry of the main supply. wrote in message ... Hi, Aquired this TV about a week ago. Was dead dead. No standby supply. I found an open winding on the primary side of the standby xformer. Thought AHA !! Ordered a new one, put it in. Now, the power LED blinks 5 times, pauses, and repeats. Theres about 4 relays n this things pwr supplies. None of em ever click. Any ideas? TIA |
All times are GMT +1. The time now is 08:13 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter