DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   schematic wanted for Emerson TC1365A (https://www.diybanter.com/electronics-repair/105888-schematic-wanted-emerson-tc1365a.html)

[email protected] May 10th 05 04:36 PM

schematic wanted for Emerson TC1365A
 
Or if not the Schematic I would appreciate a bit of help. First off I
am too cheap or maybe just realistic to buy a schematic. The TV is a
13 inch color set that was bought for $15, and I have already bought a
13 inch replacement for $4.99 plus tax. But I would like to fix this
so it can go to someplace like a charity thrift store instead of the
land fill.

The problem is High Voltage Shutdown. It will play nicely at 115 VAC
in, but shuts down on 120 VAC which is the line voltage here. I have
not got a high voltage probe, so have not measured the high voltage,
but suspect the problem is not actually high voltage.

I have looked at the PCB and can not find a voltage regulator IC.
There is a R 803 which is labeled B+ adjust. But I don't know what the
B+ ought to be or exactly where I should measure it. Maybe on C 803?

Anyway if there is any kind spirit that has a schematic, I sure would
appreciate a little help.

Dan Caster
DLCASTER57 at Yahoo


[email protected] May 10th 05 07:26 PM

Check you closest bigger city library and photo copy the H.W. Sams
section you need.


[email protected] May 11th 05 05:25 AM

I will try the Seattle library system the next time I am there. I have
already tried the Kitsap County Library system.

Thanks.
Dan


[email protected] May 25th 05 07:03 AM

I stopped at the Seattle central library yestarday and photo copied
most of the SAMS that I needed. Thanks for the suggestion.

Dan



All times are GMT +1. The time now is 12:02 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter