Sharp 13SB50 tv
 

I agreed to look at this set for a friend and my online search for similar
symptoms hasn't turned up anything. I haven't opened it yet - thought I
would see if the solution were widely known.

The problem appears that the set will not respond to the remote control.
She had two remotes that used to control it, and neither one seems to have
any effect. This tv model is only controllable with the remote (totally
stupid idea) so I don't know if the set will operate any other way. I can
turn it on with the set power button, but can't change the channel or
anything with the remote.

I'm not sure how to really check the remote itself as I don't have another
identical tv to try it on. Viewing the remote with a video camera shows
that the led is putting out, so at least that's a good sign. The main one
is a universal and I tried resetting the proper code and also scanning -
both to no avail.

Anyone already go through this?

WT

I'm not sure how to really check the remote itself

Point the remote control at a video camera. If it's working you will
see it glow.

IR is only just off the visual range and most (all?) cameras reach
this.

Thanks for the thought - I had pointed out that I did that and there is
output, but that's the extent of my ability to test the remote for that
particular model. Any thoughts past that?

WT

"Just Another Theremin Fan" wrote in message
oups.com...
I'm not sure how to really check the remote itself

Point the remote control at a video camera. If it's working you will
see it glow.

IR is only just off the visual range and most (all?) cameras reach
this.

Wayne Tiffany wrote:
I agreed to look at this set for a friend and my online search for
similar
symptoms hasn't turned up anything. I haven't opened it yet -
thought I
would see if the solution were widely known.

The problem appears that the set will not respond to the remote
control.
---snip

could be:
1. defective infra red sensor
2. defective or noisy supply to ir sensor
3. 5v transistor in micro circuitry

there is , i seem to recall, a section in the TV faq
(www.repairfaq.org) about checking the ir sensor. they usually have 3
pins, scoping the output one will give you an idea of whether the
pulses are non existent or scrambled

-Ben

On 9 May 2005 10:49:23 -0700, "Just Another Theremin Fan"
wrote:

I'm not sure how to really check the remote itself

Point the remote control at a video camera. If it's working you will
see it glow.

IR is only just off the visual range and most (all?) cameras reach
this.

A remote can sometimes put out a signal and still be faulty, by being
off frequency. It's rare, though.

Tom

Try cleaning the TV IR port.
JR

Wayne Tiffany wrote:

I agreed to look at this set for a friend and my online search for similar
symptoms hasn't turned up anything. I haven't opened it yet - thought I
would see if the solution were widely known.

The problem appears that the set will not respond to the remote control.
She had two remotes that used to control it, and neither one seems to have
any effect. This tv model is only controllable with the remote (totally
stupid idea) so I don't know if the set will operate any other way. I can
turn it on with the set power button, but can't change the channel or
anything with the remote.

I'm not sure how to really check the remote itself as I don't have another
identical tv to try it on. Viewing the remote with a video camera shows
that the led is putting out, so at least that's a good sign. The main one
is a universal and I tried resetting the proper code and also scanning -
both to no avail.

Anyone already go through this?

WT




--
--------------------------------------------------------------
Home Page: http://www.seanet.com/~jasonrnorth

Do you mean as in just wipe off the cover? Could it really be that simple?

WT

"JR North" wrote in message
...
Try cleaning the TV IR port.
JR

Wayne Tiffany wrote:

I agreed to look at this set for a friend and my online search for
similar symptoms hasn't turned up anything. I haven't opened it yet -
thought I would see if the solution were widely known.

The problem appears that the set will not respond to the remote control.
She had two remotes that used to control it, and neither one seems to
have any effect. This tv model is only controllable with the remote
(totally stupid idea) so I don't know if the set will operate any other
way. I can turn it on with the set power button, but can't change the
channel or anything with the remote.

I'm not sure how to really check the remote itself as I don't have
another identical tv to try it on. Viewing the remote with a video
camera shows that the led is putting out, so at least that's a good sign.
The main one is a universal and I tried resetting the proper code and
also scanning - both to no avail.

Anyone already go through this?

WT




--
--------------------------------------------------------------
Home Page: http://www.seanet.com/~jasonrnorth