Replaced laser, ....I don't get it.
Replaced laser pick up, error 11 ???? Pioneer DEH-2400
I don't get it. I pulled the working pick up out of this one to fix another deck (same model) Then, I ordered a new pick up and when it arrived I installed it. Now, the disc spins, sled moves to center position and laser makes 2 attempts to read, then displays error 11. Pioneer DEH-2400 I need some feedback here. yours truely, tired and frustrated |
Check to see if there is a shorting solder jumper or blob, to protect
the laser during shipping. When installing, the calibration procedure must be done. You will need the calibration CD, DVM, and a scope to properly do the job. Refere to the service manual for details. Jerry G. ====== |
Check to see if there is a shorting solder jumper or blob, to protect
the laser during shipping. When installing, the calibration procedure must be done. You will need the calibration CD, DVM, and a scope to properly do the job. Refere to the service manual for details. Jerry G. ====== |
All times are GMT +1. The time now is 02:37 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter