Home |
Search |
Today's Posts |
|
Electronic Schematics (alt.binaries.schematics.electronic) A place to show and share your electronics schematic drawings. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.binaries.schematics.electronic
|
|||
|
|||
DSO2250-USB compensation loss due to GUI screen position (0/1)
Recently received DSO2250-USB shows AC compensation loss due to GUI screen position. The same effect of screen position occurs for calibrated waveforms in both AC and DC coupled modes. The two screenshots show the effect of shifting an AC calibration waveform from the lower to the upper part of the GUI display.(CH2) No other changes, but the loss of compensation is demonstrated. Note that the internal PPKvolts measurement feature shows the reverse effect. An increase in measured ppk is indicated for the waveform with no overshoot/severe undershoot. The compensation loss results in `7LSB distortion in the display, and a 50mV difference in a 2vppk measurement. Anyone know how this fault is achieved and how it might be corrected? RL |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
DSO2250-USB compensation loss due to GUI screen position (0/1) | Electronic Schematics | |||
DSO2250-USB compensation loss due to GUI screen position (1/1) | Electronic Schematics | |||
Weather Compensation? | UK diy | |||
Spot Drill tip compensation | Metalworking | |||
Mid-Position 3 Port Valve - Hot Water (A) position & OFF - but HW flow to boiler? | UK diy |