Automatically powering 220V dust vac when 220V saw starts
1 Attachment(s)
Per request on seb
Note that the CT in the GFCI can be used. The Coilcraft CT shown was used for space/layout. |
Automatically powering 220V dust vac when 220V saw starts
"ChairmanOfTheBored" wrote in message
... On Wed, 14 Nov 2007 05:50:19 GMT, ehsjr wrote: Per request on seb Note that the CT in the GFCI can be used. The Coilcraft CT shown was used for space/layout. It is a LOT easier to simply mount a standard light switch that turns on the dust collector, and turn the damned thing off when you are done with the saw, you lazy *******. (talking to the OP) My, my, my. I guess you told me, didn't you? No doubt everyone here is suitably impressed. I'm always puzzled by obnoxious snots like you who for some reason, no doubt related to the way their mommy toilet trained them (or didn't), the fact that no one would sit with them in the lunch room 30 years ago, their persistent inability to form a meaningful sexual relationship, or some similar pathetic remnant from their pointless lives, feel the need to strike out at a total stranger on a matter of no concern whatsoever to themselves. Where you frothing at the mouth and stamping your little foot in anger when you unleashed this mean spirited and ill-informed tirade? You don't HAVE boredom asshole, you're a bloody CARRIER PLONK, insignificant flyspeck. "The OP" |
Automatically powering 220V dust vac when 220V saw starts
"ehsjr" wrote in message
news:v0w_i.5469$cD.410@trndny08... Per request on seb Note that the CT in the GFCI can be used. The Coilcraft CT shown was used for space/layout. Thanks Ed! Dan |
Automatically powering 220V dust vac when 220V saw starts
Nice! But I just used a relay off the motor-supply line. Works!
....pixmaker On Wed, 14 Nov 2007 05:50:19 GMT, ehsjr wrote: Per request on seb Note that the CT in the GFCI can be used. The Coilcraft CT shown was used for space/layout. |
Automatically powering 220V dust vac when 220V saw starts
"ChairmanOfTheBored" wrote in message ... On Wed, 14 Nov 2007 05:50:19 GMT, ehsjr wrote: Per request on seb Note that the CT in the GFCI can be used. The Coilcraft CT shown was used for space/layout. It is a LOT easier to simply mount a standard light switch that turns on the dust collector, and turn the damned thing off when you are done with the saw, you lazy *******. (talking to the OP) Also, the spool up time of most dust gathering system, let alone the lag of the air in the ducting for it means that it won't be ready to do the job while the cut is being made if it gets turned on by the saw blade motor and then turns off just after. It also means that the ducting will likely plug up with sawdust since the system needs to remain on a few seconds AFTER the cut is made. Just stick to doing it manually. Sheesh. What a lazy **** world this has become. I can see "Help me move this 400 pound load from point A to point b." but NOT "Help me to not have to throw this switch, I'm such a lazy ****tard." Un****ingbelievable. well, tell me , do you know what reason he wants a dust vac to power up , when saw starts ??? well, no . maybe he`s handicapped, or has sore arms etc,, i dont know ... dont go mouthin of , when u dont know the reason why ...' **** |
All times are GMT +1. The time now is 03:37 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter