VCR S-VHS JVC HR-S9500 Switches off after 6 seconds
If the power levels look correct, then remove and thoroughly clean and
reassemble the mode switch.
Bob
"Mark D. Zacharias" wrote in message
. ..
"jomiservice" wrote in message
...
This a typical problem in JVC VCRs
Take off the power supply module and replace all the electrolitic
capacitors.
jomiservice
I think a HR-S9500 has the SMPS on the main board, and since it's not
enclosed, the caps don't tend to go bad as often.
Mark Z.
|