I've used a one part epoxy called "POXY COAT". It is approved for food.
I originally used it on a cider press.
No need to flood, just put a coulple coats on. I've had a red oak table
outside in SE MI for 3 years no with no problems.
Dave
SD: No affiliation with poxy coat
Handyman wrote:
I need some ideas on how best to create a dam around the edge of the
table. I have already put an edge on it, I used a 1/2" round over,
leaving a 3/32 edge at the top. I wish to use the pourable epoxy but I
don't want to let it run over the edges. The edge I will finish
seperately. Any Ideas?
--
Handyman
|