"Herbbrau" wrote in message
oups.com...
My house is over 25 years old. I bought it about 3 years ago. The
handle in the bathroom is stripped and it slips when it turns. I looked
all over it but cannot tell what it is. How can I find out? If I can't,
can I replace the whole thing myself or is ir a job for a plumber?

Single handle? If it is a Delta (very popular) you will see the same style
in most any hardware store, Home Depot, etc. You can buy a replacement. It
may only be the set screw that holds the handle, or it can be the stem that
it is attached to. Rebuild kits are available for that also.

If it is a dual handle system, you can buy replacements for that also. To
take the old one off you usually pop a cover off the top, loosen the screw
and just pull the knob off

I don't know your skills, but in general, faucet replacement is fairly
simple. The hard part is getting the old one out as you are working under
the sink and it can be difficult to get the nut that holds it in place. A
special wrench is made for that.