On Mon, 29 Mar 2021 08:49:24 -0500, Leon lcb11211@swbelldotnet
wrote:

On 3/28/2021 8:28 PM, wrote:
On Sun, 28 Mar 2021 15:30:10 -0500, Leon lcb11211@swbelldotnet
wrote:

On 3/28/2021 2:43 PM, wrote:
On Sun, 28 Mar 2021 10:31:04 -0500, Leon lcb11211@swbelldotnet
wrote:



Imagine that my MV sits on the counter, about where the leather bag
is in this shot:

https://www.flickr.com/photos/lcb112...n/photostream/

I have never had an issue with a microwave walking or sliding from where
it was placed. Nor has the customer had a complaint of their microwave
moving in the 25 years that they have lived in this house.



I have a short piece 2 x 4 between the back of the MV and the
backsplash to keep the
MV near the front of the counter. Without it, the MV slides backwards
with use and ends
up too deep to be convenient. That extra 3 1/2" forward makes a big
difference.

Will backward movement be an issue with the cubby you built?


No. And there is no movement. The microwave opening is already there.
I am only dressing up up the cabinet opening so that it does not look
like a cabinet missing it's doors.

Can the microwaves easily replaced with a different size? Microwaves
aren't exactly the most reliable appliances and come in all sorts of
non-standard sizes.


Absolutely, I am only making the opening 1.25" narrower and shorter.
The opening is 24.5" x 18".

With opening smaller than the front (if I understand you), I'd worry
about heat. How are you cooling the microwave?


The microwave is about 1/3 the volume of the cuby. The cuby is huge
compared to the size of the microwave.

With that aside. A built in oven has less air gap and those run for
longer periods of time.

They have a lot more insulation in them and the electronics are
designed to be constrained. Microwaves are designed for their
particular use. Built-ins are not the same as counter models.

Heat has never been an issue for this customer nor our older home that
had the same set up for the microwave.