Thread
:
Reviewing a cheap CRT degaussing wand
View Single Post
#
15
Posted to sci.electronics.repair
Ralph Mowery
external usenet poster
Posts: 4,228
Reviewing a cheap CRT degaussing wand
In article ,
says...
For a one-off use, I would likely stick to the soldering gun - does the trick, even if used "off-label". I bring my 100/300 watt Craftsman gun to Kutztown for the occasional chassis connection, and it is as often as not borrowed by the TV guys for cleaning up the old TV pictures, but seldom for soldering.
But if I had to do this every day, or even every week, I would likely invest in a purpose-built device from a reliable maker and reliable source. As I am fond of writing: The Internet is your friend!
I thought most crt screens had a coil around then that helped degauss
them every time they are turned on. Unless someone puts a magnet near
the screen I doubt that many would need degausing.
With almost everything switching to the flat screens there is probably
very little need for a dedicated degausing coil unless your shop
specilizes in restoring old electronics. Hard for me to see any shop or
one doing much work would not have a soldering gun that could be used.
Maybe many do not know the soldering gun could be used.
Reply With Quote
Ralph Mowery
View Public Profile
Find all posts by Ralph Mowery