making wires on circuit board immobile but able to be removed later?
What would be wrong when using conventional glue sticks?
Conventional glue-sticks have a much lower plastic temperature than the others - Anything lower than about 120 F should be fine. But understand that the melting point is about 175 F. Archival glue-sticks melt from 250 F to 380 F depending on the application. Electronics glue-sticks are designed for hot-temperature application or 350 F to 380 F. In a solid-state device with low voltages and (always) low ambient and operating temperatures, conventional glue-sticks should be fine unless labeled otherwise. Low-voltage unless the sticks carry a UL-94 listing.
Peter Wieck
Melrose Park, PA
|