On 8/1/2020 11:01 PM, AK wrote:
I am looking for an easier way of removing this piece of particle board.

https://imgur.com/a/QzNlWUg


Use a jigsaw (or circular saw) to saw thru it going to the corners .
Should be easy to pry out once it's cut . To replace the cabinet floor ,
screw a couple of strips of wood to the sides flush with the bottom of
the dado . Cut your piece 3/8" wider than the inside dimension , slide
the new floor into the dado on one side as you drop it in place then
when it's in place slide it over so you have both sides captured in the
dado . Couple of finish nails to keep it in place and caulk with a good
quality siliconized latex caulk to keep moisture from penetrating the
edges . Next time buy better quality cabinets , particle board sucks .
--
Snag