On 2020/01/28 11:38 a.m., amdx wrote:
On 1/28/2020 1:20 PM, amdx wrote:
On 1/27/2020 5:41 PM, John-Del wrote:
I have one of these old timers and the bar sweep and color sweep
section isn't working.Â* Strangely, there are color bars over the dot
and cross hatch patterns which I don't recall being a normal
situation.Â* All the switches are clean and tight.
Anyway, I have the full owner's manual that includes maintenance and
calibration instructions, but no actual schematic.
Does anyone have a schematic of the 500 generator board and parts
layout for the same board?Â* This is the only board where the
component legends are not silk screened on the board, and there are
at least 12 ICs - all 16 pins each, most of them the same number.
You might try asking on the forum.
http://www.videokarma.org/
Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â* Mikek
Â*Oh, I found a post asking for the VA48 schematic.
It could even be you, first name is John!
No response. :-(
Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â*Â* Â*Â* Mikek
Could be indeed!
John ;-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."