View Single Post
  #3   Report Post  
Posted to sci.electronics.repair,sci.electronics.design
John Larkin[_7_] John Larkin[_7_] is offline
external usenet poster
 
Posts: 13
Default could this simple solution work for solder smoke device?

On Fri, 8 Nov 2019 12:25:02 -0500, Alex Borroughs
wrote:

I've been looking for a cheap, possibly DIY solder smoke solution. I
did see the device here that someone shared, but it appears to use water
and it looks like he's adding the carbon later. I had hoped for
something simpler, then I came across this:

https://www.youtube.com/watch?v=kH5APw_SLUU


My local home improvement store has this filter:

https://www.amazon.com/dp/B00TUDHPS8...ing=UTF8&psc=1


That particular filter, although somewhat expensive (MERV=12), is
supposed to remove smoke along with a host of other pollutants. It
looks like there are one or two filters also available at even higher
MERV ratings, but more expensive and I wanted the cheapest alternative
that would still take care of the smoke. Using a filter like this in
front of the box fan and placing near my soldering area would no doubt
suck in the smoke, but what about the effectiveness? Anyone ever try it
or use this method? Also, as I wouldn't be running the combination all
the time, it should last a lot longer than 3 months.

Thanks.


How would you know if it works?

--

John Larkin Highland Technology, Inc
picosecond timing precision measurement

jlarkin att highlandtechnology dott com
http://www.highlandtechnology.com