View Single Post
  #3   Report Post  
Posted to rec.crafts.metalworking
DoN. Nichols[_2_] DoN. Nichols[_2_] is offline
external usenet poster
 
Posts: 2,584
Default Stryco MF-4 blade welder

On 2019-10-04, cowboydel wrote:

Hi yall I picked up one of theses Stryco MF-4 blare welders
when I bought a old saw sharpening shop the fellow that owned it had
passed on so the family was selling it and didnt know how
things worked and there was no manuals.


This appears to have the manual for download.

http://www.vintagemachinery.org/pubs/detail.aspx?id=6036

This looks interesting. I've not seen one like this before. I
suspect that it need cleaning and oiling in the gear train and bearings.
It should turn off the welding current at the right point in time.

So Ive put a new plug
on it 220v cleaned it up oiled it up and now it will spark like crazy
when you hold the weld button down the clock turns some times it stays
on until you manually disengage it, the anneal button it heats the blade
up red hot. However I have no idea what Im doing I can melt the
heck out of the blades I can get them to stick together but they are
brittle ate the weld no matter what I set it at. So first off help
please before I end up with pipe melted bandsaw blades and have to tell
everyone the game to shorten there bandsaws, and second foes ANYONE know
where I might find a users manual for the Stryco MF-4??????


The site above has for the MF-3, which may be close enough.
MF-3 is good for up to 2" wide blades, MF-2 for 1-1/2", MF-1 for 1", so
your MF-4 is likely good for up to 2-1/2" or 3" wide blades.

As for the annealing, based on my Chinese blade welder, what you
do is momentarily push the anneal button, release, and repeat going
longer until you have a red in the middle of the blade, going longer
presses until you get the color you need, then start shortening the
press time until it goes dark. The slow cooling is *important* to the
annealing.

Actually -- first release the clamps, let the jaws move apart,
and then re-clamp with the weld in the middle between the clamps.

Any help
would be much appreciated, my wife adds before I burn something down.
Now I dont think that was called for but wow you would think
theres s celebration going on when you use there machine and
you would want to make sure its used in a safe area.?Thanks in
advance yall!!!! Any help would be awesome!!! Happy Trails!


Good Luck,
DoN.

--
Remove oil spill source from e-mail
Email: | (KV4PH) Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---