On Fri, 26 Jul 2019 16:18:23 -0400, Tekkie®
wrote:
Dean Hoffman posted for all of us...
On 7/25/19 11:05 PM, A K wrote:
I am looking for a swivel adapter that will allow the turning of screws at an angle.
https://imgur.com/gDSc3mP
Thanks,
Andy
Dewalt makes these:
https://www.homedepot.com/p/DEWALT-1-4-in-Hex-MAXFIT-Pivot-Holder-DWAPVTMF/205997269
Thanks Dean, was not aware of these. I have found the flex shafts to be
troublesome and the others at fixed angle of 45 or 90 deg just do not cut
it.
Should work at least a few times - if you can hold it well enough to
keep the bit square in the screw head without camming out. and if the
required angle is less than 21 degrees - - - -