SMPS troubleshooting
What is the most likely fault scenario?
What should I check next?
wire yourself up a dual outlet box with a line cord an on off switch and a duplex outlet.
Cut the tabs on the outlet and wire the two sections in SERIES.
Plug your UUT into one outlet and a 60 Watt incandescent lamp into the other outlet.
Now you can troubleshoot. If there is a short, the light will limit the fault current.
Also beware using a scope that the ground in your circuit may be live.
I would buy or make an isolation transformer as well for your safety.
Replace the FET and cap and turn it on with the 60Watt bulb in series.
m
|