View Single Post
  #11   Report Post  
Posted to sci.electronics.repair
John Robertson John Robertson is offline
external usenet poster
 
Posts: 907
Default Flakey Molex(?) connectors

On 2019/06/18 7:34 a.m., wrote:


If they're tin plated, they are not good for small signals. The
contact surfaces can usually be restored by simply pulling and
reinserting the connector a few times. Square pins can be brushed
clean. The problem will reoccur. It can be agravated by mixing tin
with gold flash (pins vs receptacles. Sometimes the gold flash in the
receplacles is local and hard to identify.

Depending on humidity and temperature levels, the tin/tin contacts are
good for between 6 and 10 years, between cleanings.

RL


google "fretting" corrosion.

can be insidious to troubleshoot

mark


Thanks for that info - I went to one link:

https://www.windpowerengineering.com...o-do-about-it/

where they talk about fretting corrosion in wind turbines. Even when
there is lubrication fretting corrosion occurs, but it is more benign
with lubrication as opposed to no lubrication.

So I suggest folks look at something like Dow Corning #4 dielectric
grease for connectors that experience any vibration to increase the MTBF
of the connection(s). I know DC#4 helps my games run longer between
service.

Others swear by De-Oxit, but the resulting contact protection is
probably similar.

John :-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."