Tighten carriage screws
On 5/12/19 7:14 PM, unionworkeruk wrote:
I need to use carriage screws with bolt heads through hole in a steel
frame to
underside ofÂ* new woodÂ* stair treadsÂ* The screws will be m8 or 10 and 30mm
long. Is there something like an electric screwdriver to tighten them as I
will be working by touch only on the lower ones near the floor and
bolting them upward. I dont relish the thought of using an ordinary
spanner on the 100
plus screws that will be needed
There are nut driver sockets that fit into impact drivers.
https://www.amazon.com/Neiko-10250A-Magnetic-Quick-Change-12-Piece/dp/B00B1YN6RS/ref=sr_1_5?crid=T3EYFPADYPD3&keywords=impact+drive r+socket+set&qid=1557707180&s=gateway&sprefix=impa ct+driver+%2Caps%2C199&sr=8-5
These might help:
https://www.amazon.com/s?k=impact+driver+socket+adapters&hvadid=783402785 70469&hvbmt=be&hvdev=c&hvqmt=e&tag=mh0b-20&ref=pd_sl_2nq2w784sr_e
And ratchet wrenches:
https://www.amazon.com/GearWrench-9416-Metric-Master-Ratcheting/dp/B0002NYD1W/ref=sr_1_5?keywords=ratchet+wrench&qid=1557707021& s=gateway&sr=8-5
I'm pretty sure Harbor Freight has them too. One time use and
light duty would
make those acceptable.
|