replying to Andy Burns, Steve brown wrote:
Just did mine can be quite awkward but I found undoing the 8 torx screws with
a tx20 long reach screwdriver needs to be just over 100mm long because of 1
hard to reach screw and splitting the case then I used a jubilee clip over the
4 prongs tightened it up a bit to close the prongs and the handle prised out
quite easy the whole process took me about 30 minutes but I wasn't rushing and
jobs a good un
Hope this helps
--
for full context, visit
https://www.homeownershub.com/uk-diy...l-1213614-.htm