Thread
:
vision enhancement for close work
View Single Post
#
8
Posted to sci.electronics.repair
Tim R[_2_]
external usenet poster
Posts: 261
vision enhancement for close work
On Friday, December 14, 2018 at 7:57:29 PM UTC-5, Ralph Mowery wrote:
In article ,
says...
I just avoid any PCBs with SMDs! Surface mount stuff is way beyond me I'm
afraid. Fortunately I'm only a hobbyist so it matters very little.
I started SMD around 64 and am 67 now. With the microscope similar to
what every one uses, the SMD is really very easy to work with. Once the
trouble is found or a modification is desired, I would rather work with
that than the through hole or even the old tube circuits. I only do the
board work as a hobby. Takes about $ 300 to $ 400 to get the tools to
work with and the microscope is over half that.
Thanks. Are we talking an optical microscope, or something digital? Any recommendation?
I've tried binoculars since the surgery, and they work very well, much better than before.
Reply With Quote
Tim R[_2_]
View Public Profile
Find all posts by Tim R[_2_]