View Single Post
  #1   Report Post  
Posted to rec.crafts.metalworking
Terry Coombs[_2_] Terry Coombs[_2_] is offline
external usenet poster
 
Posts: 3,115
Default Compressors - kinda on topic !

Â* Well , Mr. Compressor has a case of the humms . That is , when I try
to start it , it just humms (until the O/L cuts it off if I let it go
that long). This is the original motor on an old Speedaire 60 gallon
tank , 220 volts and 3450 RPM's . Specs call for 15 amps full load ,
rated output is 2.98Kw , about 6 hp . This is an Emerson/Doerr
compressor duty motor .Â* Tested both caps , one is good and the other
isn't according to the tests with my DMM . Problem is that the bad cap
has rubbed the capacitance and voltage ratings off the label . Got a
couple of calls in , looked around on the internet , can't find a
definite answer . I'm pretty sure it needs to be around 250uf and at
least 250 volts - though maybe higher voltage to account for spikes . I
have the motor type/classification numbers , just can't find a reference
to check ... anybody got a lead on that type of info ?

--
Snag
Yes , I'm old
and crochety - and armed .
Get outta my woods !