Replacing Large Electrolytics
I had 3 faulty electrolytics; all 30V/5500uF. In my spares bin I found 6
NOS (new old stock) electros of values 35V/3300uF which when stacked 2
high and wired in parallel occupy - fortunately - the same footprint as
the ones that failed.
These spares, though unused, are probably 40 years old. Will they need re-
forming gradually over 24hrs before installing?
This message may be freely reproduced without limit or charge only via
the Usenet protocol. Reproduction in whole or part through other
protocols, whether for profit or not, is conditional upon a charge of
GBP10.00 per reproduction. Publication in this manner via non-Usenet
protocols constitutes acceptance of this condition.