View Single Post
  #7   Report Post  
Posted to sci.electronics.repair
Gareth Magennis[_3_] Gareth Magennis[_3_] is offline
external usenet poster
 
Posts: 105
Default reflowing BGA with a hot air gun?

It's worth a go if the laptop is scrap otherwise.

Chances of success are extremely slim though.


The success stories you see on Youtube are either fake, or the tiny
percentage of these repairs that lasted long enough to make the video.



Gareth.







wrote in message ...

I have a laptop that is acting really weird. It's an older ASUS,
probably ten or twelve years old. It was plugged in, closed, sitting
on a table. It worked fine a few days before the problems started. The
display keeps shaking. The machine takes forever to boot up. And then
acts weird. But if I push down hard on the lower left side of the
machine it works fine. As long as the pressure is kept up and in just
the right area.
I spoke to my son about this problem because he knows more about
this kind of thing than I do. He said it sounded like a video card
problem that he and some of his computer whiz friends have run into.
Apparently the video processor can get too hot and the BGA under it
can start to debond.
He has a hot air rework tool and he said I might be able to reflow
the chip. Is this something that a rank amateur can likely do?
Eric