On 01/18/2018 07:37 PM, John Fanelli wrote:

I just replaced the belt on a PDC-100. I got it from
https://www.turntableneedles.com. A 9.8" small square belt worked just
fine -
their part # SBS9.8. Cost $5.



Hello, and I was the OP on this. I subsequently solved my dilemma with
a replacement flat belt from Suburban Electronics. They have quite a
selection of these small drive belts and at very reasonable prices.
Shipping cost is somewhat less reasonable. Sincerely,
--
J. B. Wood e-mail: