I have a GE non-self cleaning gas range, Series XL44, about 5 years old.
The oven will not light. The ignitor would get red hot, then go out,
and then stay on long enough to only get luke warm. I replaced the
ignitor (which was a bit of a pain since the new one came with a
slightly different connector... even though it was the correct model).
The ignitor got red hot, but the gas did not flow. Leaving the range
on, the ignitor did not get red hot again.

So could the problem be with the gas valve? or something else.

thanks in advance for any advice/wisdom that you may offer.

sincerely,

Matt the frustrated landlord