There are a number of methods used. There is the one with the rubber type
of micro contact strip that works with pressure.

There is the type where there is a ribbon cable, that is attached, by an
adhesive. The process for this one uses a special adhesive that is attached
with a heat die. If this type separates, a new ribbon is required, and the
proper heat die is also required to heat it back. A soldering iron is not
the way to go.



--

Greetings,

Jerry Greenberg GLG Technologies GLG
=========================================
WebPage http://www.zoom-one.com
Electronics http://www.zoom-one.com/electron.htm
=========================================


"Nelson" wrote in message
ws.net...
I have a Pedometer with a LCD display attached to the main circuit
board with a ribbon cable, one end of which has come loose. My first
instinct is just to heat up the individual traces but I can't tell if
it was attached with solder or something else. Also I am nervous about
melting the plastic backing or the ribbon cable.

Does aanyone know how these things are normally attached and/or how to
repair them?

Thanks.

--
Nelson