View Single Post
  #12   Report Post  
Posted to rec.woodworking
tiredofspam tiredofspam is offline
external usenet poster
 
Posts: 1,212
Default Black and Decker Bandsaw 9411 Type I

What no one seems to have mentioned is :

How fast you are moving the wood. If you are moving too slow it can
burn. There is a proper feed rate for a band saw. Too slow the wood is
in contact with the blade too long. To fast and you will bog the unit
down, or you can bind, or snap a small blade.

The type of wood, both pine and cherry burn more quickly.



On 3/28/2012 7:50 PM, Keith Nuttle wrote:
To start off I realize it is a cheap saw and I could do better, but for
$25 I thought it was a good deal to work a bandsaw into my needs in
woodworking.

Question: I picked it up at a yard sale with three blades for $25, and
thought it would be a good starter bandsaw. I brought it home and
downloaded all of the manual and parts list. I spent most of Monday
cleaning it up. (Though it was obviously well maintained but not used
for a long time. Mud Wasp nest under the table and in the knobs gave
that away.)

Based on the manual I adjusted the alignment, and turned it on. I think
it works perfectly. I did some play cuts, and noticed that it appeared
to burn the wood slightly when I cut curves. Since I did not smell any
burning I thought there may be a little rust on the blade.

Me question is a slight burning on the curves normal with this type of
bandsaw, or is it something I am doing.