On 2/10/2012 8:11 PM, Jeff Liebermann wrote:
On Fri, 10 Feb 2012 11:47:54 -0600,
wrote:

The Box is a CISCO RNG100
Only data I know how to get is;
Tuner 537.00 Mhz 2dbmv
TDC 75.25 Mhz 5dbmv
RDC 20.00 Mhz 30.0dbmv Yes 30.0


It's the same as the Cisco Explorer 1540C with some features removed
by Comcast.
http://www.cincinnatibell.com/shared_content/pdf/tv/exp1540_uguide.pdf

How to get into the diagnostics:
Press and hold SELECT on front of unit until the MAIL light
starts to flash, then press INFO.
Or
Press and hold PAUSE on remote until MAIL light starts to
flash (around 10-15 seconds), then press PAGE-UP (-).
On some remotes, PAGE (+) might need to be used instead.

See if you can excavate the SNR numbers. Maybe there's RF garbage on
the systems (oscillating distribution amp, ingress, whatever, etc).

Hi Jeff,
I don't seem to be able to follow your directions, I don't think I
have enough buttons. To get the info I posted, Push and hold the power
button until the power light blinks, then push power again and the info
screen comes up.
I don't know what the MAIL light is, I don't have a select button nor
a INFO button.
Hey started pushing buttons on the remote, found I can scroll through
15 pages off stuuf I don't have a clue about.

Got some "RF Statistics on page 5"
Current FDC
Freq. 75.250
Level 5 dbmv
S/N 29db
Errs/Ave 0/0

Current Qam
Freq. 513 Mhz
Level -1dbmv
S/N 35db
Errs/Ave 11/0 or 11/1 or 11/3 but mostly 11/0

That's all I can see.
Mikek