On Fri, 10 Feb 2012 08:38:44 -0800, Jeff Liebermann
wrote:
I think the official minimum pull test is 55 lbs, but
I'm too lazy to Google for it now.
40 lbs outdoors, 30 lbs indoors.
http://www.scte.org/documents/pdf/standards/SCTE_124_2011.pdf
6.2.2
Axial Pull Force: The male “F” pin type connector, when
attached to cables manufactured to SCTE approved standards,
shall withstand a minimum axial pull force of 40 lbs for
outdoor and 30 lbs for indoor applications when tested
per ANSI/SCTE 99 2009, Test Method For Axial Pull
Connector/Drop Cable.
I doubt that the crimp connectors could pass the test.
--
# Jeff Liebermann 150 Felker St #D Santa Cruz CA 95060
# 831-336-2558
#
http://802.11junk.com
# http://www.LearnByDestroying.com AE6KS