"Doug Miller" wrote in message
...
In article , "dadiOH"
wrote:
Doug Miller wrote:

Then remeasure. You will find that:
- your block is 152mm long.

- you want a 6mm border at each end.

No he doesn't, he wants 1/4" and 6mm doesn't equal that. Close but no
cigar, so much for metric unless you can measure 6.35mm on that tape

Do you *really* think that 0.35 millimeters (less than 14 thousandths of
an
inch) is going to be noticeable? Or are you just trying to be
argumentative?

Had enough of that from SWMBO this past week, don't need it from you too.

My guess is he wants them about "this far in" holding fingers apart about
1/4" or 6.35mm or 4.115 parsecs