Gerald Miller wrote:

On Tue, 15 Feb 2011 22:39:19 -0500, John
wrote:

Gerald Miller wrote:
On Tue, 15 Feb 2011 14:55:08 -0800 (PST), wrote:

On Feb 14, 9:30 am, Larry
wrote:
On Sun, 13 Feb 2011 18:59:18 -0800,
wrote:

Is the purpose of the goop they slather around the bead of a tubeless
tire to lubricate during installation, to help seal the tire rim
interface, or both? I have a freebee dolly on which one of the tire has
a very very slow leak at the interface. What is this goop? The local
auto parts store was of no help.

Generally, it's just a soapy water mix for lubing the tire onto the
rim. Once it evaporates, it's gone. There is no extra sealing
capability.

To seal from the inside, install some of the green slime.http://tinyurl.com/4nz5zz2

--
Remember, in an emergency, dial 1911.

Second on the Slime. I've got a tubeless tire on one dolly that does
exactly that, a short shot of the slime fixed it up.

I've only ever seen them use a swab with some tire soap on it when
mounting my tires, comes in a bucket. Only for seating beads and
keeping the rubber from tearing when stretching it over the rims.
Lubricant only, no sealing properties.

Now if you've got a tube in your tire, the slime may just make a mess,
you'd have to patch the tube.

Stan
The thing I can't understand, is why manufacturers insist on mounting
tubeless tires on everything such as wheelbarrows, snowblowers and
other low speed equipment. I can understand that tubless tires run
cooler at high speed but on a wheelbarrow? snowblower? After ten
years, the tires are checked and the rims are rusted, so the owner
gets to install the tube that should have been there in the first
place. The lawn tractor with low pressure tires does a sharp turn and
catches some grass stems or twigs in the bead and developes a slow
leak (I, personaly, traced this down and fixed it - the lady was using
a bicycle pump every time she went to cut the grass).
What is there for not installing tube type tires on low speed
equipment?
Gerry :-)}
London, Canada


A wheelbarrow tire is one of the hardest tires to seal the bead on after
it has been broken. Filling the tire with foam is one solution.

John
Just put a tube in and be done with it until the tire rots off in
another 20 years.


Not around here. Cactus needles love to puncture any type of
inflatable tire.

--
You can't fix stupid. You can't even put a band-aid on it, because it's
Teflon coated.