View Single Post
  #3   Report Post  
Posted to uk.d-i-y
TheScullster TheScullster is offline
external usenet poster
 
Posts: 1,283
Default fitting cooker hood



Usually connected by a flexible connector, the sheet metal riser is just a
cover. An inch each way should be about right.

Is it not usual to have an elbow straight out through the wall, rather than
going up into the ceiling void?
The reason I ask is that I intend to fit a cooker hood, but there is a joist
running parallel to the wall in the ceiling directly above the hob location.
Probably occupies a 3" strip of space from the wall IYSWIM.

Phil