View Single Post
  #3   Report Post  
Posted to alt.building.construction,alt.home.lawn.garden,alt.home.repair
jloomis jloomis is offline
external usenet poster
 
Posts: 380
Default Building Steps on dirt slope/ questions

I would use pressure treated fir. The type now used is somewhat
safe.......copper ammonia base I believe.
I would use 1/2" x 12" or so rebar pins. Cheap way to go and last a
lifetime.
Railroad ties are nice and do have the "heavy duty" oils in them for
protection although it is hard to find "nice" ones.
I almost did an extensive path like this just the last month or so. Got
hung up with inspectors etc. so through in the towel.
The path was an existing use path for 100 years, (and then some)and had been
worked on off and on by residents, owners etc. and they wanted a contractor
to come in and do it right. Well going to the official Building Dept. put a
wrench in the gears immediately. Of course we needed an enviornmental
study.......and review with the coastal commission. Also a endangered
plant and animal study.....and then...you name it. I should have just put
it in......now people slip and slide down a gravel dirt, mess still using
the path....I tell you, the official business bs really hampers
progress.......john

"James" wrote in message
net...
I plan to build some steps into a sloped hill, using timbers. I had some
built about ten years ago, and used PT lumber rated for ground contact,
which was .8 penetration level.

I know that the chemicals used, and applicable ratings, have now changed
for
PT lumber. What would the equivalent now be for what was .8 "ground
contact" ??

I also previously used 12 inch galvanized sprial nails to connect the
timbers to make the steps. Will these nails be ok for the new type
treated
lumber ? I buy them at Home Depot, and they are not labeled hot dipped
or
anything like that. They just say, galvanized nails.

I "think" that I will use 6 x 6 PT beams, like I did before. But,
some
articles refer to "landscape timbers." Exactly what are they referring to
?
I don't want to use railroad ties... I want a more updated look, which the
6 X 6 beams provide. But, there may be a more suitable and long lasting
type timber that I should use, and I would like to know more about my
options.

Thanks for any advice on these many questions !!

James