Remember that o-ring groove in that piston?
On May 13, 6:08*pm, "Bob La Londe" wrote:
...I drilled it on the drill press. *I
really need to throw this damn thing away. *The table was tilted side to
side. *I straightened that today, but found the table is also slightly
tilted front to back. *GACK!!! *...
Long before I found a mill I fixed my cheap drill press by making the
head slide down the column so I didn't need the table, only the
squarer base. It can also be clamped to a large beam or plate to drill
it.
jsw
|