"Karl Townsend" wrote in message
anews.com...
I'm repairing the same issue on my airblast sprayer for about the fifth
time. Own something long enough and the same problems keep repeating. the
sprayer has a vibration in it at 2500 tractor RPM, 540 PTO RPM. The
vibration is not like a tire out of balance but its a bucking forward to
reverse. When it gets a little lose, in a few more hours of run it will
damn near shake the tractor off the ground. Its also a natural harmonic
at this RPM, slow down and the vibration goes away. Unfortunately, this
REALLY reduces sprayer performance.

I'm replacing the entire PTO shaft and tightening up the clearance in the
gear box again. if everything is tight, the problem is less severe. The
is working on the symptom, not the cause.

This is a long shot, anybody know about balancing this sort of vibration
or changing the natural harmonic frequency?

Karl


Elastomeric coupling? (page 2): "The flexible element absorbs the
unavoidable torsional vibrations..."
http://pdf.directindustry.com/pdf/ko...-46550-_2.html