Show Me Your TS Cross Cut Sled
"Robatoy" wrote in message
...
On Jan 17, 10:00 am, "Joe" wrote:
two things:
I glued a couple 5" disks of 220 sandpaper to the fence to cut down on any
lateral slip of the workpiece.
Before I attached the rear fence, I routed a shallow (1/4") recess and
screwed in a piece of ply. When it gets worn out, replace it.
Good idea! I will do that to mine. Thanks
If memory serves (and it rarely does), it was about 3" x 3"
|