Beckett burner on oil boiler not firing
On Sep 23, 5:49*am, "Ed Pawlowski" wrote:
"Van Chocstraw" wrote in message
That is usually the electrodes not firing because the transformer is
weaker. Try bending the electrode or adjusting them closer together unless
the transformer is dead.
There is a time delay and light sensor in the burner that shuts it off in
30 seconds if there is no fire. It IS possible no fuel in going in there.
If so, trouble shoot fuel.
Before bending them, just try wiping them first. *If they are sooted up,
they will not fire.
Check if your oil is getting to the nozzle. it could be clogged, or
you might have air in the line, in that case you need to unscrew the
bleeder on the burner assembly. Also check the obvious, is oil running
in the line to the burner.
|