View Single Post
  #3   Report Post  
Posted to sci.electronics.repair,alt.tv.broadcasting,misc.consumers.house,alt.home.repair,rec.video.cable-tv
GMAN GMAN is offline
external usenet poster
 
Posts: 23
Default Need help - no signal from TV antenna in the attic

In article , wrote:
Hi,
I just moved in to the new house. There is a 4-way coax splitter in
the attic, which has one input and four outputs (to different rooms).
I know that previous owners had a cable (from the cable company). It
looks like the cable was going into the same splitter in the attic,
and then routed to rooms downstairs.
I want to use the TV antenna in the attic.
I tried connecting the TV antenna to splitter's input =96 absolutely no
signal is getting to TVs downstairs. I also connected the antenna to
each of splitter=92s outputs (which go to TVs) =96 exactly the same
outcome - not even a change in a static when I plug in the antenna.
I bought a TV signal inline amplifier from RadioShack =96 absolutely no
difference.
However, if I drop a 100' coax cable directly from the antenna in the
attic to the TV downstairs (bypassing the splitter and all of the home
cable wiring), the picture is crisp and perfect.
Can I run some tests to ensure cable continuation (from the attic to
rooms downstairs).
Does anybody know how I can get the signal from the antenna in the
attic to TVs downstairs?
Thank you.


Try a female/female rf connector from radio shack. Bypassing the splitter to
see if it sends signal to each tv's



If that doesnt work, then suspect the cable from the Antenna to the splitter
is bad??? If it does work, get a new splitter.