Thread: Roof question
View Single Post
  #6   Report Post  
Posted to alt.home.repair
Red Green Red Green is offline
external usenet poster
 
Posts: 4,946
Default Roof question

Norminn wrote in
m:

Erma1ina wrote:

JonP wrote:


I just received a re-roofing quote from a contractor that says that
the job will require 17 squares. The property is 950sqft under roof
and the pitch is 4.5/12.

Is it possible that a 950sqft house can have a 1,700sqft roof? I'd
measure it myself but it's a 500 mile trip to the house.



Given that pitch, 17 square for the roof seems VERY high for a 950
sqft house.

Check out this calculator. The results are rough -- no accounting for
type (hip, gable, etc) of roof -- but it won't be wildly off:

http://www.servicemagic.com/resource...oofing.13.html


I dusted off some brain cells I haven't used in a while and tried to
calculate based on the geometry
I can remember......close, but my calc. was under 1,000. Even with a
2' overhang and 10% waste,
it comes to around 12 squares. If the roofer is known and reputable,
nothing wrong with questioning
the estimate. Could be something as simple as a typo. If he tries to
explain it away, then another
roofer is in order.


Just x**2+Y**2=r**2 is all ya need to dust off. Remember ol' Pythagoras?