wrote in message ...
On Apr 22, 1:04?am, gpsman wrote:
On Apr 21, 9:31 pm, "nospam" wrote:

"Pat" wrote in messagenews:bdedneh80L-Ao5DVnZ2dnUVZ_gudnZ2d@mcminnvilleaccesscompany...

"nospam" wrote in message
...
A few months ago we moved into a rented house that uses a propane
tank for heat, and the owner isn't willing to replace the piloted stove/
oven combo with one that isn't sucking up propane 24/7 (at $3.50/
gallon). ?We've adjusted the pilots best we could, but we can tell by
the amount of heat that a lot of energy (and $) is being wasted. ?The
owner won't even allow us to replace the unit at our own expense!

Short of shutting off the valve to it entirely, and losing functionality
(practically speaking) of a stove/oven, do any other options exist?

Turn the pilot off and light it with a match. ?I bet the landlord would
agree to a new one if you make it clear that it will remain after you leave.

Pat, as far as we can see there's no valve on the unit except the main
one behind it. ?So simply turning the pilots on/off entails moving the
whole thing out from the wall.

I think (but don't know) that you can just blow them out and a safety
valve will shut them off. ?Then you can just light "by hand".

If I'm wrong somebody will most likely correct me within 30 minutes,
if not 30 seconds, if not 30 nanoseconds...
?-----

- gpsman- Hide quoted text -

- Show quoted text -

nope no safety for that.

Yeah, we tried blowing out the pilots and all that happened
was the kitchen smelled like raw propane.

theres a screw that sets pilot flame size,
just screw it down turning off pilot.

We'd still like an easier solution. The burner pilot screws
are below a panel that has to be removed, the same is
true for the oven pilot. What a PITA.

The unit model# is G.E. JGBS03PPA3WH. The label
mentions an electronic ignition option, anyone know if it
can be easily/cheaply added?