Since trolls rarely respond to back to a thread, we must assume that you are
serious.
It seems that at one time you removed or softened a finish with acetone and
somehow reused what ever you removed. That finish was most likely lacquer
which I guess you can redisolve and get some sort of useable finish.
OTOH, the stripper that you used really wreaks the paint at a molecular
level. Its full of very nasty stuff that breaks up the polymer bonds
created in the binder. It also contains wax that is used to keep the sludge
from drying out.
So I guess you could distill out the nasty chemicals and then figure out how
to separate out the pigments, re-grind them up really fine, remix in the
proper binders and solvents and then put in what ever other additives are
needed. Its all described here
http://en.wikipedia.org/wiki/Paint.
Good luck
--
**** Notice to Gmail users ****
Due to the large amount of Newsgroup SPAM from GMAIL accounts
I have and everyone who knows how to use filters are blocking all posts from
these accounts.
If you don't want your posts to be deleted tell Google to fix their problem.
"Blaine Whether" wrote in message
news:4cGOj.249$Y81.21@trndny09...
"Norminn" wrote in message
m...
Blaine Whether wrote:
I have a project actually requiring the reuse of paint AFTER it has been
stripped with a chemical stripper. The problem I have is that I don't
know how to redissolve the resulting sludge and chips that the stripper
produces back into as close to the original paint as possible. I realize
it wouldn't be perfect, but how can I thin and dissolve the paint
stripper sludge?
Thanks,
Blaine
You can add more paint remover to it, but it will NOT be anywhere close
to paint. What on earth
are you doing?
Not looking for paint, although if I can get somewhat close to that it
would be ok. I just need to dissolve the resulting sludge and chips into
a solution. The thinner, the better. Acetone worked wonders at removing
and dissolving paint in the past, but I am now up against paint that
acetone doesn't dissolve. The paint stripper will do it, but always
leaves a sludge and I need this dissolved too.